X-Duty Cleaner

X-Duty Cleaner is a multi-purpose, non-acidic cleaner to prepare surfaces for sealing. It removes graffiti, stains and grout residue. It is suitable for engineered concrete, terracotta tile, pre-cast stone, paver, sandstone, limestone, brick, slate, marble, granite, porcelain, terrazzo, vitreous tile and grout.

Benefits

• Use to clean surfaces prior to sealing with Stain-Proof or other sealing products.
• Removes graffiti.
• Removes stains.
• Removes grout residue.
• Easy to use.
• Low odor.
• Performs indoors and out.

Application

1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST.
2. Sweep surface to remove dust and dirt.
3. Use product directly from the container.
4. Apply solution to the surface using a clean white cloth and allow 60 seconds for penetration before lightly scrubbing using a natural bristled brush.
5. Wipe off excess using a clean white cloth and rinse with clean water to remove residue.
6. For stubborn deep-seated stains, wet the surface with X-Duty Cleaner for two minutes and repeat steps 3-5.
7. Ensure surfaces to be treated are dry, clean and free of residues. Apply when surface temperature is between 40° and 95° F.
8. Clean equipment with water.

Safety Precautions

1. Do not take internally. Keep away from children.
2. Avoid moisture contact with the surface for six hours after application.
3. Protect surrounding areas from overspray.
4. Keep away from drains, plants, water and soil.
5. Wear suitable gloves, protective clothing and safety goggles.
6. Avoid applying in windy conditions.
7. Wash hands thoroughly after applying.
8. Use product within 12 months of purchase.
9. Keep container tightly sealed, in a cool well-ventilated place.
10. Click here for a Material Safety Data Sheet.
11. Nationwide Poison Control Center: 1-800-222-1222.